Musical Fidelity KW SACD

Stok Kodu: CA239

Durum: Kullanılmış

Sold/Satıldı/01.12.2014

Photograps used in this ad are current and

reflect actual condition of the devices, they are not cited

Shipping (Fedex) is done worldwide. Please ask shipping costs.

Daha Fazla Detaylar

Değerlendirmeleri oku
Bir değerlendirme yazın

Daha Fazla Bilgi
Değerlendirmeler

Tube & Solid State Output
Dual differential DAC.--Outstanding technical performance.
Extremely accurate linearity down to very low levels (typically -100dB).
Lets you hear right into the far distant corners of the recording.
Foremost non existent distortion.
You can hear everything on the recording as it happened on the day.
Excellent noise ratios. Everything, but everything can be heard.
Two output stages operating at the same time (one tube and the other solid state).
By connecting both the output stages to your amplifier you can switch between tube and solid state and select the one which compliments your hi-fi system and your discs on an individual basis. Really useful.
Specifications:
DAC architecture 24 bit Delta-Sigma (Bitstream) Dual mono dual differential 8x oversampling Separate stages for valve (tube) and solid state outputs
Disc mechanism Philips
Upsampling 192kHz
Analog output impedance 50 Ohms
SACD analog output, solid state
Frequency response 10Hz to 20kHz ref. 1kHz: +0, -0.1 dB 10Hz to 30kHz ref. 1kHz: +0, -0.3 dB 10Hz to 40kHz ref. 1kHz: +0, -1.6 dB 10Hz to 50kHz ref. 1kHz: +0, -4.8 dB
Signal / noise ratio (digital mute) > 115dB "A" weighted
Total harmonic distortion < 0.001% at 1kHz
Channel separation > 98dB 10Hz to 20kHz
Linearity error, 1kHz 0dB at -100dB 0.2dB at -110dB
Audio output at digital 0dB level 2.3VRMS at 1kHz nominal
CD analog output, solid state
Frequency response 10Hz to 20kHz ref. 1kHz: +0, -0.05 dB
Signal / noise ratio (digital mute) > 120dB "A" weighted
Total harmonic distortion < 0.002% at 1kHz
Channel separation > 98dB 10Hz to 20kHz
Linearity error, 1kHz 0dB at -80dB 0.5dB at -90dB
Audio output at digital 0dB level 2.2VRMS at 1kHz nominal
Jitter 150pS
Tube class A output
Frequency response 10Hz to 100kHz ref. 1kHz: +0, -0.4 dB
Signal / noise ratio > 115dB "A" weighted
Total harmonic distortion < 0.001% at 1kHz
Overall gain 0dB
Connectors
Analog outputs 1 pair RCA connectors for valve (tube) output, 1 pair RCA connectors for solid state output
Digital outputs (CD only) 1 optical (Toslink), 1 S/PDIF (Sony/Philips Digital Interface Format) RCA connector
General
Power requirements 100 / 115 / 230V AC 50 / 60Hz (factory preset) 50 Watts
Weight 19.5 kg, 43 lbs unit only, un-boxed 24.4 kg, 54 lbs in immediate carton 28.1 kg, 61.9 lbs in shipping over-carton
Dimensions 483mm, 19 inches wide 167mm, 6.6 inches high including feet 443mm, 17.5 inches deep including rear terminals and on/off button
Standard accessories Remote control handset (kW universal type), 2 batteries size LR03 or AAA, manganese alkaline type, IEC mains lead (10 Amp type)